Description
Aoide DAC II, which features ES9018K2M DA Conversion by Ess Technology Inc.
Take your digital music collection to another level with High-Resolution Audio . By capturing music at a higher rate than CD ( up to 384 kHz/32-bit , rather than 44.1 kHz/16-bit), High-Resolution Audio allows you to get closer to the original studio recording and enjoy your music just as the artist intended.
Equipped with high quality Headphone Amplifier TPA6133A2 by by Texas Instruments.
High-power output, very high fidelity headphone amplifier, allows music, not the amplifier, to be heard.
80/100Mhz high precision master clock
Elements to awaken every note
Higher resolution sound is achieved through carefully selected low-impedance parts including a thick copper foil main board.
MELF resistors
Devised to reduce noise
Headphone output incorporates a MELF resistors resistor for low distortion and low resistance.
Film capacitor
Capitalize on the film condenser
A film condenser minimizes interference from vibration and electrical sources.
True to the original
Experience high quality playback of PCM (Pulse Code Modulation) converted content (DSD 256/128/64 ) with the same warm sound of the DSD (Direct Stream Digital) original.
Features:
- Bit Perfect, Support up to 32Bit/384kHz
- High-performance ES9018K2M DAC Chip
- Built-in 5V Voltage Swing Headphone AMP
- 3.5mm Headphone Output and Line Out(RCA)
- Support Digital Volume Control
- Support DSD256/128/64; 32Bit/384KHz(PCM)
- Audio Formats Supported: DSD, APE, FLAC, WAV, WMA, AAC, ALAC, AIFF, OGG, MP3
Specification:
Line out:
Frequency Response: 20Hz~20KHz +/-0.1dB
S/N: -119dB +/-1dB
THD+N: -120dB
DNR: 127dB
Headphone out:
Frequency Response: 20Hz~20KHz +/-0.1dB
THD+N: 0.0021% (16ohm load)
Output Level: 138mW(+4dB gain)
SNR: 93dB
PSSRR: >100dB
CMRR: 69dB
Dimension:
65W x 62L x 23H (mm)
Weight:
23g
Package Included:
1 pcs * DAC II Sound card
1 pcs * Aluminium case for DAC II work with Pi 4B
System Download:
How to Play the Lossless Music by Volumio:
Download the img file which we supply, unzip and write to a micro sd card.
Insert the card to Raspberry Pi, connect the Raspberry pi to network.
Manage the sound card by web.
Setting:
Select the I2S DAC to “On”, and set the Output device to “Aoide DAC II”, save and reboot.
How to assemble:
1. Fixed the four feet studs with screws.
2. Fix the Raspberry Pi board with the copper studs and the spacer studs.
3. Insert the DACII sound card, and fix it with screws.
4. Fix the Pi and the sound card to the inner case.
5. Push the inner case in to the outer case and fix them together.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Color | CasekitSupportPi3B, CasekitSupportPi4B, caseOnlyfor3B, caseOnlyfor4B |
| Compatible With | Raspberry Pi |
| Accessory Type | Extension Board |
