FPGA module. Development board XMF5 For XILINX VIRTEX-5 XC5VLX155T

1) XILINX XC5VLX155T FFG1136 1C FPGA

• 24320 Virtex-5 Slices (155648 Logic Cells)
• 128 DSP48E Slices
• 212x 36Kb RAM blocks (7632Kb, 550MHz)
• 6 Clock Management Tiles
• 1 Endpoint Block for PCI Express
• 4 Ethernet MACs
• 16 GTP RocketIO 3.75 Gb/s Transceivers (6 routed on this board)
• 680 User I/O (211 routed on this board)

2) ST M25P64 SPI Flash

• 64Mbit
• SPI Bus Interface
• FPGA configuration
• Post-configuration access
• More than 100000 Program/Erase Cycles and 20 year data retention

3) Onboard IO peripherals

• 128Mbit 133MHz SDRAM
• 256Kbit EEPROM
• CH340G USB UART port
• 50MHz CMOS oscillator for IO
• 75MHz LVPECL oscillator for Rocket IO
• Four IO LEDs
• Two IO push buttons

4) RocketIO Transceivers

• 2x SATA HOST port
• 2x SATA TARGET port
• One MGT clock input routed to SMA connectors
• Two transceivers routed to 1.27mm male header

5) Handy configuration

• 14-pin JTAG header
• Indirect Programming of SPI Flash
• Mode select jumper (JTAG or FLASH)
• Push button for manual initiation of configuration process
• Reset supervision by voltage monitor
• DONE LED

6) Onboard power supply

• 3.3V 4A (IO, PERIPHERALS)
• 2.5V 1.5A (VCCAUX)
• 1V 16A (CORE VOLTAGE)
• 1.2V 1.5A (Rocket IO)
• Input voltage range 4.5V – 5.5V
• POWER-GOOD LED
• AUX input for I/O voltage 1.14V-3.45V

7) 161 I/O routed to the connectors

• 15 differential pairs with matched PCB tracks
• 6×27 male pin array, 135 I/O with selectable voltage level
• Three 2×6 female connectors, 24 I/O with selectable voltage level
• Peripheral modules support
• 2.54mm pitch for all connectors
• I²C header
• Test points for FPGA temperature diode 

8) Small 100x100mm PCB with M3 mounting holes