DDS Dual-channel Function Signal Generator Arbitrary Waveform Generator 250MSa/s 14bits Frequency Meter VCO 60MHz

This series of Dual-channel Function Signal Generators combines multiple functions in one, such as Function Signal Generator, Arbitrary Waveform Generator, Pulse Generator, Analog/Digital Modulator, VCO, Sweep, Counter and Frequency Meter, etc. The instrument adopts the Direct Digital Synthesizer(DDS) technology and provides stable, precise, pure and low distortion signals. It’s a great testing or measuring instrument for electronics engineers, electronic laboratory, teaching and researching. 

Features:
Adopt the Direct Digital Synthesizer(DDS) technology and provide stable, precise, pure and low distortion signals. 
2.4 inch TFT color LCD with 320*240 resolution, simultaneously display parameters and graphics of CH1 and CH2.
Use soft silicone keys instead of traditional patch keys, longer service life and more comfortable to operate the instrument.
Use 14-bit high-speed D/A converter chip(5Vpp output quantization error is less than 1mV), 250MSa/s sampling rate and 14bits vertical resolution.
Can output up to 98 groups of functions/arbitrary waveform: 34 groups of preset waveform and 64 groups of user-defined waveform.
Enable to store 64 arbitrary waveform data files, each one of waveform storage depth is 8192 points * 14bits.
Various Modulation Types: AM, FM, PM, ASK, FSK and PSK modulations.
Sweep Function: linear sweep and logarithmic sweep functions; 0.01s-999.99s sweep time; up, down and roundtrip sweep directions.  
VCO Function(Voltage Control Output): support VCO voltage control signal output function(such as voltage controlled oscillator).
Burst Output Function: there has manual trigger, internal CH2 trigger and external trigger for your options. It can output 1~1048575 pulse trains.
Frequency Meter Function: Max. frequency workable is 100MHz and Min. frequency workable is 0.01Hz.
Counter Function: 2 coupling measure modes including DC coupling and AC coupling.
Support two or more signal generators connected to achieve multi-channel output, the maximum support 16-channel synchronous output.
Completely independent dual channels output, synchronizing operation between channels.
The phase adjustment range of the two channels is 0~359.99°, and the adjustment accuracy is 0.01°.
With Digital Signal Output Function: it can realize any CMOS level with 0~10V amplitude.
Equipped with channel tracking function, when the tracking function is turned on, all parameters of both channels can be updated according to the user’s configuration at the same time.
High Amplitude Resolution: the minimum amplitude resolution can reach 1mV, amplitude range is 1mVpp~20Vpp.
The duty cycle of each channel can be adjusted independently(0.01%-99.99%), with 0.01% resolution.
With -10V~+10V DC offset function (≤20MHz), resolution up to 1mV.
Storage Function: can save 20 groups of parameters set by the user and extract at any time.
Communication Function: all functions can be controlled by PC program and the communication protocol is open for secondary development.
Output Short-circuit Protection: all signal outputs can work under load short-circuit conditions 60S or more.
Arbitrary Waveform Editing Function: user can edit arbitrary waveform on PC and then download to output from the instrument.

Specifications:

Package List:
1 * DDS Signal Generator
1 * Power Cable
1 * USB Data Cable
1 * BNC-BNC Cable 
2 * BNC-Clip Cable