Description
Extends HDMI signals up to 190 feet, extend any audio/video HDMI connection up to 190 feet using tcp/ip over a single cat5/5e/6/7 cable
190-Feet (60m) HDMI Extender Over Single Cat5/Cat6 Ethernet Cable with IR Control, 1080P & 3D Support EDID Funct
1080P 190ft HDMI Extender {One to One only}
Supports up to 1080p at 60Hz
HDMI signal: Comply HDCP
Resolution supported: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz
No separate audio cable is required. Only supports the PCM audio output
Remote IR Controlling
Use the included IR cables to control HDMI video source from a remote location.
Support EDID Function
This allows the video source to then send out a video signal that is supported by the monitor.
One to One only
HDMI source device — Extender TX — Ethernet Cable — Extender RX — HDMI display
Simple Installation and Operation
Easy plug-and-play installation is as straightforward as connecting video cables and turning on the extender.
No software installation or configuration is required.
Wall mountable to keep hidden or off the ground.
Package Contents:
1 X Sender
1 X Receiver
1 X IR Transmitter extension cable
1 X IR Receiver extension cable
1 X User Manual
2 X 5V DC Power adapter
FAQ
Q: Does work with switch or Router
A: Don’t work any switch or Router
Q: Does this device comes with IR plugs?
A: Yes, they do. Each device has an IR plug, one that transmits and one that receives an IR signal
Q: Image is red and sound is noisy
A: Please use good quality CAT6 newt work cable or above version, length is longer than 15M, and the optimal length is 20-30M
Q: The indicator light is always flashing No signal on the input device
A: Please adjust the resolution of your input device to 1080p@60kHZ Or lower NO compatible 4K
Q: The screen just goes blank for a second or 2 then the signal returns
A: Please use good quality CAT6 newt work cable or above version, length is longer than 15M, and the optimal length is 20-30M The cable head should meet IEEE-568B Standard
Q: IR don’t work
A: Please make sure the TX and RX are connected correctly and no obstacle between the infrared remote control
- Connector A: HDMI
- Connector B: RJ-45
- Gender: Male-Female
- Certification: None
- Type: HDMI Cables-compatible
- Version: HDMI 1.4
- Shielding: Braid
- Feature: HDMI1.4-compatible
- Application: Multimedia
- Outer Diameter: 8cm
- TYPE: HDMI Extender
- Transfer Distance: 60m
- Dc adapter: EUR, US PLG
- Sender to Receiver: 1 to 1
- Cable Requirement: CAT5/5e/6
- Audio format: 2ch stereo aduio/LPCM
- Resolution: 1080P
- IR Function: NO
