Description
6S Power Wall Project
Product parameters
6S1P without BMS 6S 1P BMS
Weight : 96g Weight : 121g
Size :151*85*23mm Size:151*85*24mm
Voltage : 24V Voltage : 24V
6S 2P
Weight : 145g
Size :150*85*45mm
Voltage : 24V
Matters needing attention
★★★★Please purchase at least one BMS. We did not connect the negative output of the 6S without BMS (including 6S 2P) XT60 plug in the design, it needs to use the front copper socket and ribbon cable to connect 6S BMS for output.BMS can provide charge and discharge equalization function for the entire system (multiple battery boxes) at the same time.
★Take a 3000 mA battery for example, the 6S 1P battery box full of batteries the capacity is 3ah, 6S 2P is 6ah, and you can stack the number of battery boxes according to your actual needs.
★25.2v charger is needed for 6S charging.
★It is recommended that the charging current of each layer should not exceed 2A, otherwise, the battery may become hot (for example, choose 2A charger for only one layer, and 4A charger for two layers).
★Do not put on the metal tabletop to use, pay attention to insulation do not short circuit.
★The battery faces up the circuit board, all the batteries face the same cannot interleave. The direction of battery installation is subject to the mark on the circuit board，not the mark on the plastic battery box.
★Do not connect the wrong power supply, the circuit board is marked, pay attention to the observation.
★The list price is the price of a circuit board or a battery box.
If you use a solar panel to charge the battery, you need to bring your own voltage control module. If the output voltage of the solar panel is too low, you need to increase the boost module. If the output voltage of the solar panel is too high, you need to increase the buck module. For specific questions, you can contact our store customer service.
